TIREX INTERNATIONAL
Tires For The 21st Century
SIMEX
OTR Tires - Loader / Dozer

OTR Tire Classification Guide
Simex English | Simex EspaŮol | Simex PortuguÍs | SimexTornel Chinese
Passenger Car | Light Truck/SUV | Truck Bias | Truck Radial | Earthmover | Grader
Loader/Dozer | Compactor/Snow/Sand | Industrial | Solids | Agri-Tractor | Industrial Tractor

SE11-G2
SE11-G2
An open-spaced, open-center, traction pattern with aggressive tread bars and good self-cleaning properties to promote traction capability on soft ground conditions. This pattern should be considered where movement over relatively soft or yielding surface is required.
Tire Size Ply Rating

TT

TL
14.00-20 14 0 .
10.00-24 8,10 0 .
13.00-24 8,10,12 0 0
14.00-24 12,14 0 0
15.5-25 8,10 0 0
SE7-E2/G2
SE7-E2/G2
A driving pattern designed primarily for drive wheels on all heavy-duty off-the-road equipment used for earth-moving and grading service. A rugged pattern with massive alternate linked and independent tread bars for maximum traction with minimum damage to the surface. Performs well when operating in sand, loam, mud and soft soil conditions.
Tire Size Ply Rating TT TL
16.00-24 12,16,20 . 0

SE188-E3/L3 & SE188 E4/L4

* Industrial application available

SE188-E3/L3
A non directional standard pattern depth tire produced for heavy duty off-the-road service under conditions where the average operating speeds are high. The flatter tread profile and optimised tread bar and tread groove design porvide wider ground contact area for longer tread life and improved traction on softer ground.
Tire Size Ply Rating

TT

TL
*12.00-20 16,18 0 .
*14.00-24 20,24,28 0 .
*16.00-25 24,28,32 0 0
*18.00-25 28,32,36,
40
0 0
*21.00-25 20,24 0 0
*18.00-33 32,36,40 0 0
20.5-25 12,16,20 0 0
*23.5-25 12,16,20,
24
. 0
*26.5-25 20,24,26,
28
. 0
29.5-35 22,28 . 0
37.25-25 30,36 . 0
SE188 E4/L4
Tire Size Ply Rating

TT

TL
*23.5-25 20,24 . 0
*18.00-25 28,32,36,
40
. 0
*18.00-33 32,36,40 . 0
27.00-49 42,48 . .
15.5-25 8,10 0 0
SE6-E3/L3/E4

* Industrial application available

SE6-E3/L3/E4
A non-directional standard pattern depth tire produced for heavy duty off-the-road service under conditions where the average operating speed are high. The heavy, high density tread bars use high cut and wear resistant rubber compounds to give long tread life without excessive heat generation.
Tire Size Ply Rating TT TL
12.00-24E3E4 12,16,20 0 .
14.00-24 16,20,24,
28
0 .
12.00-25 16,18 0 0
14.00-25 16,20,24 0 0
17.5-25 12,16,20 0 0
20.5-25 12,16,20,
22
0 0
23.5-25 12,16,20,
24
. 0
26.5-25 20,24,26,
28
. 0
29.5-29 22,28,34,
40
. 0
33.5-33 32,38 . 0
29.5-35 28,34 . 0
33.25-35 32,38 . 0
*16.00-25E4 24,28,32 . 0
*18.00-25E4 28,32,36,
40
. 0
*18.00-33E4 32,36,40 . 0
*18.00-33E4 32,36,40 . 0



SE88-E2/L2
SE88-E2/L2
The SE 88 is for equipment operating in very soft conditions where mobility is of the utmost importance. The V shape bars are widely spaced to provide excellent self-cleaning properties. The wide bars with flat tread contour result in a large contact area and even distribution of ground contact pressure.
Tire Size Ply Rating TT TL
17.5-25 12,16,20 0 0
20.5-25 12,16,20 0 0
23.5-25 12,16,20,
24
0 0
SA14 G2/E2/L2
SA14-G2/E2/L2
A specially designed tread pattern which provides excellent traction and self-cleaning properties.
Tire Size Ply Rating TT TL
13.5-20 10 0 .
42x17-20 6,10 0 .
17.5/65-20 10 0 0
16.00-25 16,20,24,
28
. 0
20.5-25 12,16 0 0
23.5-25 12,16,20 0 0



SE133-E4
SE133-E4
A modern deep tread, non-directional rock pattern. It has a dense center to provide mileage and resistance to stone damage and the cross grooves graduall widen towards the shoulder to provide good stone ejection and mud slearance for superb traction.
Tire Size Ply Rating TT TL
12.00-24 12,16,20 0 .
14.00-24 20,24,28 0 .
SN38-E2/L2/G2
SN38-E2/L2/G2
A non-directional pattern for grader, shovel loader and dump truck service with traction, braking and side skidding resistance in snow condition
Tire Size Ply Rating TT TL
14.00-24 *SCC rim 10,12,14,
16
0 0
14.00-24 20,24 0 .
16.00-25 24,28 0 0
20.5-25 12,16 0 .
23.5-25 12,16,20 0 0


TT505-E3
TT505-E3
A strong and sturdy directional tire. This tire gives excellent mileage, traction and evenness of wear. Very suitable for logging trucks and other vehicles operating in severe off-the-road conditions.
Tire Size Ply Rating TT TL
12.00-24 16,18,20 0 .
SE132-E3/E4
SE132-E3/E4
A modern deep tread, non-directional rock pattern specifically designed for dump trucks working in conditions where cutting and wear are problematic. The pattern is designed with a very flat tread profile and dense center to give superb working hourage and resistance to rock damage. The cross grooves are specially designed to eject stones and mud for good traction and the reduces mass in the shoulders gives good resistance to heat build-up.
Tire Size Ply
Rating
TT TL
18.00-25
E3/E4
16,28,32,
36,40
. 0
18.00-25
E3/E4
28,32,36,
40
. 0
21.00-35
E4
32,36,40 . 0
Tire Size Ply
Rating
TT TL
24.00-35
E4
32,36,40 . 0
24.00-49
E4
42,48 . 0
24.00-49
E4
42,48 . 0
30.00-51-E4 46,52 . 0

SE65-L5
SE65-L5
A heavy duty 65 series wide base tire designed for loaders and dozeers operating in severe abrasive conditions such as quarrying and rock mining operations. The extra deep tread with a very flat profile and opposing cross grooves offer efficient load distribution and excellent traction. The tread rubber is specially compounded for maximum resistance to cut and abrasion.
Tire Size Ply
Rating
TT TL
35/65-33 24,30 . 0
SE191-L5
SE191-L5
A heavy duty wide base tire designed for loaders and dozers operating in severe abrasive conditions such as quarrying and rock mining operations. The extra deep tread in a flatter tread profile offers efficient weight distribution for maximum tread life. The crossply nylon casing is made of high tensile flexible nylon cords for impact resistance and stability.
Tire Size Ply Rating TT TL
23.5-25 16,20 . 0
26.5-25 20,24,26,
28
. 0

SE6-L5
SE6-L5
This L5 rating tire has been specially designed for loader-dozer operations and is recommended for tough mining, quarying and rock handling jobs, This tire is compounded for the ultimate in cut and wear resistance.
Tire Size Ply
Rating
TT TL
29.5-29 22,26 . 0

SSL3S

SSL3S
A smooth treaded tire with a tough wearing compound designed specially for abrasive surface in ports and rocky conditions in mines and quarries where masimum resistance to wear and to cutting is required.
Tire Size Ply Rating TT TL
*14.00-24 20,24 0 .
*16.00-25 24,28,32 0 0

* Industrial application available

SSL4S
SSL4S
A smooth deep treaded tire with a tough wearing compound designed specially for rocky conditions in underground mines, open pits and quarries where maximum resistance to cutting is required.
Tire Size Ply
Rating
TT TL
20.5-25 12,16,20 0 0

SSL5S

SSL5S
A smooth deep treaded tire with a tough wearing compound designed specially for rocky conditions in underground mines, open pits and quarries where maximum resistance to cutting is required.
Tire Size Ply Rating TT TL
20.5-25 16 . 0
23.5-25 20,28 . 0
*18.00-25 28,32,36,
40
. 0

* Industrial application available